pirezmelanie
pirezmelanie
02-03-2017
Mathematics
contestada
i need help quick! PLZ!!!!
Respuesta :
twentyonepilotssuchi
twentyonepilotssuchi
02-03-2017
= 1 3/20 or in decimal it's 1.15
hope this helps
Answer Link
amelia18
amelia18
02-03-2017
The answer would be -1 3/20 or -23/20
First you change the mixed number into an improper fraction.
-5 3/4= -23/4
Then you multiply it by the reciprocal of -5 which is -1/5
-23/4 times -1/5=-23/20
Answer Link
VER TODAS LAS RESPUESTAS ( 23+ )
Otras preguntas
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
